IXYS
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
IXTP130N065T2
Ver detalhes DataSheets

IXTP130N065T2

Product Overview

Category

The IXTP130N065T2 belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The IXTP130N065T2 is typically available in a TO-220 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Voltage Rating: 650V
  • Current Rating: 130A
  • On-Resistance: 0.065Ω
  • Gate Charge: 110nC
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

The IXTP130N065T2 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in high-power applications.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Fast switching speed enables rapid control of power flow.

Advantages

  • Suitable for high-voltage applications
  • Low conduction losses
  • Fast switching performance

Disadvantages

  • Higher gate drive requirements compared to lower voltage MOSFETs
  • Potential for higher switching losses at very high frequencies

Working Principles

The IXTP130N065T2 operates based on the principles of field-effect transistors, utilizing its gate, drain, and source terminals to control the flow of current in a circuit.

Detailed Application Field Plans

The IXTP130N065T2 is widely used in the following applications: - Motor drives - Uninterruptible power supplies (UPS) - Solar inverters - Welding equipment - Power factor correction

Detailed and Complete Alternative Models

Some alternative models to the IXTP130N065T2 include: - IRFP4668PbF - FDPF33N25T - STW75N65M5

In conclusion, the IXTP130N065T2 power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power electronics applications. Its characteristics, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models make it a versatile component in modern electronic systems.

[Word count: 368]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de IXTP130N065T2 em soluções técnicas

  1. What is IXTP130N065T2?

    • IXTP130N065T2 is a high-performance power MOSFET designed for various technical solutions requiring efficient power management.

  2. What are the key features of IXTP130N065T2?

    • The key features of IXTP130N065T2 include low on-state resistance, high current capability, and fast switching speed, making it suitable for high-efficiency power applications.

  3. What are the typical applications of IXTP130N065T2?

    • Typical applications of IXTP130N065T2 include motor control, power supplies, inverters, and other power management systems in industrial, automotive, and consumer electronics.

  4. What is the maximum voltage and current rating of IXTP130N065T2?

    • IXTP130N065T2 has a maximum voltage rating of 650V and a continuous drain current rating of 130A, making it suitable for high-power applications.

  5. How does IXTP130N065T2 contribute to energy efficiency in technical solutions?

    • IXTP130N065T2's low on-state resistance and high current capability help minimize power losses and improve overall energy efficiency in power management systems.

  6. Does IXTP130N065T2 require any specific thermal management considerations?

    • Yes, due to its high current handling capability, proper thermal management, such as heatsinking or thermal vias, is recommended to ensure optimal performance and reliability.

  7. Can IXTP130N065T2 be used in parallel configurations for higher current applications?

    • Yes, IXTP130N065T2 can be used in parallel to increase current-handling capacity while maintaining balanced current sharing among the devices.

  8. What are the recommended gate drive requirements for IXTP130N065T2?

    • The recommended gate drive requirements include a sufficient gate voltage and drive current to ensure fast and reliable switching performance.

  9. Are there any protection features built into IXTP130N065T2 for overcurrent or overtemperature conditions?

    • IXTP130N065T2 includes built-in protection features such as overcurrent and overtemperature protection to safeguard the device and the overall system from potential faults.

  10. Where can I find detailed technical specifications and application notes for IXTP130N065T2?

    • Detailed technical specifications and application notes for IXTP130N065T2 can be found on the manufacturer's website or in the product datasheet.