EL5323CR-T13

Product Overview

• Category: Integrated Circuit (IC)
• Use: Amplifier
• Characteristics: High-speed, low-power, voltage feedback amplifier
• Package: 8-pin SOIC (Small Outline Integrated Circuit)
• Essence: EL5323CR-T13 is a high-performance amplifier designed for various applications requiring high-speed signal amplification.
• Packaging/Quantity: Available in reels of 2500 units

Specifications

• Supply Voltage: ±5V to ±15V
• Bandwidth: 1.2 GHz
• Slew Rate: 3000 V/μs
• Input Offset Voltage: ±1 mV
• Input Bias Current: ±10 nA
• Input Voltage Noise: 4.5 nV/√Hz
• Output Current: ±50 mA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The EL5323CR-T13 IC has the following pin configuration:

1. V-
2. IN-
3. IN+
4. V+
5. OUT
6. NC (No Connection)
7. NC (No Connection)
8. V-

Functional Features

• High-speed voltage feedback amplifier
• Low power consumption
• Wide bandwidth for accurate signal amplification
• High slew rate for fast signal response
• Low input offset voltage for precise amplification
• Low input bias current for minimal signal distortion
• Low input voltage noise for clean signal amplification
• High output current capability for driving capacitive loads

Advantages and Disadvantages

Advantages

• High-speed performance suitable for demanding applications
• Low power consumption for energy-efficient operation
• Wide bandwidth allows accurate amplification of high-frequency signals
• Precise amplification with low input offset voltage and bias current
• Clean signal amplification with low input voltage noise
• Capable of driving capacitive loads

Disadvantages

• Limited operating temperature range (-40°C to +85°C)
• Requires dual power supply (±5V to ±15V)

Working Principles

The EL5323CR-T13 is a voltage feedback amplifier that amplifies input signals with high speed and accuracy. It operates by receiving an input signal through the IN+ and IN- pins, which are then amplified and provided at the OUT pin. The amplifier's high slew rate and wide bandwidth ensure fast and accurate amplification of high-frequency signals.

Detailed Application Field Plans

The EL5323CR-T13 amplifier finds applications in various fields, including:

1. Telecommunications: Signal amplification in high-speed data transmission systems.
2. Audio Systems: Amplification of audio signals in professional audio equipment.
3. Instrumentation: Precise amplification of measurement signals in test and measurement equipment.
4. Video Processing: Signal amplification in video distribution systems.
5. Medical Equipment: Amplification of biomedical signals in diagnostic devices.

Detailed and Complete Alternative Models

1. EL5324CR-T13: Similar amplifier with higher bandwidth (1.6 GHz).
2. EL5322CR-T13: Similar amplifier with lower bandwidth (800 MHz).
3. EL5325CR-T13: Similar amplifier with higher output current capability (±100 mA).

(Note: These alternative models are from the same product series and share similar characteristics and pin configuration.)

This entry provides an overview of the EL5323CR-T13 amplifier, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.