Veja as especificações para detalhes do produto.
IRF200P223
Product Overview
Category
The IRF200P223 belongs to the category of power MOSFETs.
Use
It is used as a switching device in various electronic circuits and applications.
Characteristics
- High voltage capability
- Low on-resistance
- Fast switching speed
- Low gate drive power
Package
The IRF200P223 is typically available in TO-220 packaging.
Essence
This product is essential for controlling high-power loads in electronic systems.
Packaging/Quantity
It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 200V
- Continuous Drain Current (ID): 50A
- On-Resistance (RDS(on)): 0.022 ohms
- Gate-Source Voltage (VGS): ±20V
- Power Dissipation (PD): 150W
Detailed Pin Configuration
The IRF200P223 has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High input impedance
- Low input capacitance
- Avalanche energy specified
- Improved dv/dt capability
Advantages
- Suitable for high-frequency applications
- Low conduction losses
- Enhanced thermal performance
Disadvantages
- Sensitivity to over-voltage spikes
- Potential for thermal runaway if not properly managed
Working Principles
The IRF200P223 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
This MOSFET is widely used in: - Switching power supplies - Motor control circuits - Inverters - Audio amplifiers - LED lighting systems
Detailed and Complete Alternative Models
Some alternative models to the IRF200P223 include: - IRF1404 - IRF3205 - IRF540
In conclusion, the IRF200P223 power MOSFET offers high-performance characteristics suitable for a wide range of electronic applications, with its advantages and disadvantages carefully considered in design and implementation.
[Word Count: 298]
Liste 10 perguntas e respostas comuns relacionadas à aplicação de IRF200P223 em soluções técnicas
What is the IRF200P223?
- The IRF200P223 is a power MOSFET transistor designed for high-speed switching applications in power supplies, motor control, and other electronic systems.
What is the maximum voltage and current rating of the IRF200P223?
- The IRF200P223 has a maximum voltage rating of 200V and a continuous drain current rating of 33A.
What are the typical applications of the IRF200P223?
- Typical applications include switch mode power supplies, DC-DC converters, motor control, and other high-power switching applications.
What is the on-resistance of the IRF200P223?
- The on-resistance of the IRF200P223 is typically around 0.023 ohms.
Is the IRF200P223 suitable for high-frequency switching applications?
- Yes, the IRF200P223 is designed for high-speed switching and can be used in high-frequency applications.
Does the IRF200P223 require a heatsink for operation?
- It is recommended to use a heatsink with the IRF200P223, especially in high-power applications or when operating at high ambient temperatures.
What is the thermal resistance of the IRF200P223?
- The typical junction-to-case thermal resistance of the IRF200P223 is around 1.25°C/W.
Can the IRF200P223 be used in automotive applications?
- Yes, the IRF200P223 is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.
What are the key advantages of using the IRF200P223 in technical solutions?
- Some key advantages include low on-resistance, high-speed switching capability, and robustness in demanding environments.
Where can I find the detailed datasheet and application notes for the IRF200P223?
- The datasheet and application notes for the IRF200P223 can be found on the manufacturer's website or through authorized distributors.