Infineon Technologies
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
BTS726L1
Ver detalhes DataSheets

BTS726L1

Product Overview

  • Category: Power Transistor
  • Use: High-side power switch for automotive applications
  • Characteristics:
    • Robust and reliable design
    • High current handling capability
    • Low on-resistance
    • Overtemperature protection
  • Package: TO-220
  • Essence: Power transistor for controlling high currents in automotive systems
  • Packaging/Quantity: Available in reels of 500 units

Specifications

  • Voltage Rating: 12V to 24V
  • Current Rating: 30A
  • On-Resistance: 8mΩ
  • Operating Temperature Range: -40°C to +150°C
  • Supply Voltage: 5V to 28V
  • Control Voltage: 3.3V to 5V

Detailed Pin Configuration

The BTS726L1 power transistor has the following pin configuration:

  1. Pin 1: Input Control Voltage (IN)
  2. Pin 2: Ground (GND)
  3. Pin 3: Output Voltage (OUT)
  4. Pin 4: Supply Voltage (VS)

Functional Features

  • High-side power switch with integrated control logic
  • Overtemperature protection ensures safe operation
  • Fast switching speed for efficient power control
  • Low on-resistance minimizes power losses
  • Suitable for various automotive applications

Advantages and Disadvantages

Advantages: - Robust and reliable design for automotive environments - High current handling capability allows for controlling heavy loads - Low on-resistance reduces power dissipation - Overtemperature protection ensures safe operation even under extreme conditions

Disadvantages: - Limited voltage and current ratings compared to some other power transistors - Higher cost compared to standard transistors due to integrated control logic

Working Principles

The BTS726L1 is a high-side power switch that operates by controlling the flow of current between the supply voltage and the output load. It utilizes integrated control logic to provide efficient power switching and protection features. When the input control voltage (IN) is applied, the transistor allows current to flow from the supply voltage (VS) to the output load (OUT). The overtemperature protection ensures that the device shuts down if the temperature exceeds a certain threshold, preventing damage.

Detailed Application Field Plans

The BTS726L1 power transistor is commonly used in various automotive applications, including:

  1. Automotive lighting systems
  2. Electric power steering
  3. Engine control units
  4. Heating, ventilation, and air conditioning (HVAC) systems
  5. Battery management systems

Its robust design, high current handling capability, and overtemperature protection make it suitable for these demanding applications.

Detailed and Complete Alternative Models

  1. BTS724G: Similar power transistor with lower current rating (20A)
  2. BTS730L1: Higher current rating power transistor (40A) with similar characteristics
  3. BTS716G: Lower voltage rating power transistor (8V to 16V) with comparable specifications

These alternative models can be considered based on specific application requirements and constraints.

Word count: 345 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de BTS726L1 em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of BTS726L1 in technical solutions:

  1. Q: What is BTS726L1? A: BTS726L1 is a high-side power switch used for controlling and protecting loads in automotive and industrial applications.

  2. Q: What is the maximum voltage and current rating of BTS726L1? A: The maximum voltage rating is typically 40V, and the maximum current rating is typically 7A.

  3. Q: What are the key features of BTS726L1? A: Some key features include overcurrent protection, short-circuit protection, thermal shutdown, and diagnostic feedback.

  4. Q: How does BTS726L1 provide overcurrent protection? A: BTS726L1 monitors the load current and automatically shuts off if it exceeds a predefined threshold, protecting the load from damage.

  5. Q: Can BTS726L1 handle inductive loads? A: Yes, BTS726L1 is designed to handle inductive loads, such as motors or solenoids, with built-in protection against voltage spikes.

  6. Q: Is BTS726L1 suitable for automotive applications? A: Yes, BTS726L1 is specifically designed for automotive applications, offering robustness and reliability in harsh environments.

  7. Q: Can I control BTS726L1 using a microcontroller? A: Yes, BTS726L1 can be easily controlled using a microcontroller through its enable pin and diagnostic feedback pins.

  8. Q: Does BTS726L1 have built-in temperature protection? A: Yes, BTS726L1 has a thermal shutdown feature that protects the device from overheating by disabling the output when the temperature exceeds a certain limit.

  9. Q: What diagnostic feedback does BTS726L1 provide? A: BTS726L1 provides diagnostic feedback through its status pins, indicating fault conditions such as overcurrent, short-circuit, or thermal shutdown.

  10. Q: Can I use multiple BTS726L1 devices in parallel to handle higher currents? A: Yes, multiple BTS726L1 devices can be connected in parallel to handle higher currents by sharing the load current evenly between them.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of BTS726L1.