Infineon Technologies
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
BTN7971BAUMA1
Ver detalhes DataSheets

BTN7971BAUMA1

Product Overview

Category

BTN7971BAUMA1 belongs to the category of automotive power switches.

Use

This product is primarily used in automotive applications for controlling high-current loads, such as motors and solenoids.

Characteristics

  • High current handling capability
  • Low on-resistance
  • Overtemperature protection
  • Short-circuit protection
  • ESD protection

Package

BTN7971BAUMA1 is available in a compact and robust package, designed to withstand harsh automotive environments.

Essence

The essence of BTN7971BAUMA1 lies in its ability to efficiently control high-current loads while providing protection against overtemperature and short-circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Maximum Continuous Drain Current: 30A
  • On-State Resistance: 19mΩ
  • Supply Voltage Range: 5V - 34V
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

BTN7971BAUMA1 has the following pin configuration:

  1. IN1: Input control signal 1
  2. IN2: Input control signal 2
  3. OUT1: Output 1
  4. OUT2: Output 2
  5. GND: Ground
  6. VS: Supply voltage

Functional Features

  • Dual-channel high-side switch
  • Independent control of each channel
  • Logic-level input control signals
  • Fast switching response time
  • Built-in protection features (overtemperature, short-circuit, ESD)

Advantages and Disadvantages

Advantages

  • High current handling capability allows for efficient control of heavy loads
  • Low on-resistance minimizes power losses
  • Overtemperature and short-circuit protection enhance system reliability
  • ESD protection safeguards against electrostatic discharge damage

Disadvantages

  • Relatively high cost compared to traditional mechanical switches
  • Requires proper heat dissipation due to high current handling capability

Working Principles

BTN7971BAUMA1 operates based on the principle of a high-side switch. It uses MOSFET technology to control the flow of current through the load. The input control signals (IN1 and IN2) determine the state of the outputs (OUT1 and OUT2), allowing for independent control of each channel.

Detailed Application Field Plans

BTN7971BAUMA1 finds extensive use in various automotive applications, including:

  1. Electric power steering systems
  2. Engine cooling fan control
  3. Electric window control
  4. HVAC blower motor control
  5. Headlight control
  6. Seat adjustment control
  7. Door lock control

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to BTN7971BAUMA1 are:

  1. BTS50085-1TMB: Dual-channel high-side switch with integrated diagnosis and protection features.
  2. TLE94112EL: Six-channel smart high-side switch with LIN interface.
  3. AUIPS7141R: Dual-channel high-side switch with overtemperature and short-circuit protection.

These alternative models provide options for different system requirements and design considerations.

Word count: 430 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de BTN7971BAUMA1 em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of BTN7971BAUMA1 in technical solutions:

  1. Q: What is BTN7971BAUMA1? A: BTN7971BAUMA1 is a high-current half-bridge driver IC commonly used in automotive and industrial applications.

  2. Q: What is the maximum current rating of BTN7971BAUMA1? A: The maximum current rating of BTN7971BAUMA1 is typically around 30A.

  3. Q: What is the voltage range supported by BTN7971BAUMA1? A: BTN7971BAUMA1 supports a wide voltage range, typically from 5V to 40V.

  4. Q: Can BTN7971BAUMA1 be used for PWM control? A: Yes, BTN7971BAUMA1 can be used for pulse-width modulation (PWM) control to regulate the speed or intensity of a device.

  5. Q: Is BTN7971BAUMA1 suitable for driving inductive loads? A: Yes, BTN7971BAUMA1 is designed to drive inductive loads such as motors and solenoids.

  6. Q: Does BTN7971BAUMA1 have built-in protection features? A: Yes, BTN7971BAUMA1 includes various protection features like overcurrent protection, overtemperature protection, and undervoltage lockout.

  7. Q: Can BTN7971BAUMA1 handle reverse polarity protection? A: No, BTN7971BAUMA1 does not have built-in reverse polarity protection. External circuitry should be implemented for reverse polarity protection.

  8. Q: What is the typical operating frequency range of BTN7971BAUMA1? A: BTN7971BAUMA1 can operate at frequencies up to several hundred kilohertz.

  9. Q: Can BTN7971BAUMA1 be used in both low-side and high-side configurations? A: Yes, BTN7971BAUMA1 can be used in both low-side and high-side configurations depending on the application requirements.

  10. Q: Is BTN7971BAUMA1 RoHS compliant? A: Yes, BTN7971BAUMA1 is typically RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets certain environmental standards.

Please note that the answers provided here are general and may vary based on specific datasheet specifications and application requirements.