814S208BKILF

Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-performance, compact design
• Package: Surface Mount Technology (SMT)
• Essence: Microcontroller
• Packaging/Quantity: Tape and Reel, 1000 units per reel

Specifications and Parameters

• Operating Voltage: 3.3V
• Maximum Clock Frequency: 100 MHz
• Flash Memory Size: 256 KB
• RAM Size: 32 KB
• Number of I/O Pins: 48
• Communication Interfaces: UART, SPI, I2C
• ADC Resolution: 12-bit
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of 814S208BKILF is as follows:

1. VDD
2. GND
3. GPIO0
4. GPIO1
5. GPIO2
6. GPIO3
7. GPIO4
8. GPIO5
9. GPIO6
10. GPIO7
11. GPIO8
12. GPIO9
13. GPIO10
14. GPIO11
15. GPIO12
16. GPIO13
17. GPIO14
18. GPIO15
19. GPIO16
20. GPIO17
21. GPIO18
22. GPIO19
23. GPIO20
24. GPIO21
25. GPIO22
26. GPIO23
27. GPIO24
28. GPIO25
29. GPIO26
30. GPIO27
31. GPIO28
32. GPIO29
33. GPIO30
34. GPIO31
35. GPIO32
36. GPIO33
37. GPIO34
38. GPIO35
39. GPIO36
40. GPIO37
41. GPIO38
42. GPIO39
43. GPIO40
44. GPIO41
45. GPIO42
46. GPIO43
47. GPIO44
48. GPIO45

Functional Characteristics

• High-speed processing capabilities
• Low power consumption
• Built-in peripherals for various applications
• Support for multiple communication interfaces
• Flexible I/O configuration options
• Enhanced security features

Advantages and Disadvantages

Advantages: - High-performance microcontroller - Compact design suitable for space-constrained applications - Wide operating temperature range - Versatile communication interfaces

Disadvantages: - Limited number of I/O pins - Relatively small memory size compared to some other microcontrollers

Applicable Range of Products

814S208BKILF is widely used in various electronic devices, including but not limited to: - Consumer electronics - Industrial automation systems - Internet of Things (IoT) devices - Automotive electronics - Medical equipment

Working Principles

The 814S208BKILF microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its flash memory to perform specific tasks. The microcontroller interacts with external components through its I/O pins and communication interfaces, enabling it to control and monitor various functions within a system.

Detailed Application Field Plans

1. Consumer Electronics: The microcontroller can be used in smart home devices, wearable technology, and multimedia systems.
2. Industrial Automation Systems: It can be employed in programmable logic controllers (PLCs), motor control units, and industrial monitoring systems.
3. Internet of Things (IoT) Devices: The microcontroller enables connectivity and control in IoT devices such as smart sensors, gateways, and actuators.
4. Automotive Electronics: It can be utilized in automotive control units, infotainment systems, and advanced driver-assistance systems (ADAS).
5. Medical Equipment: The microcontroller finds application in medical devices like patient monitoring systems, diagnostic equipment, and implantable devices.

Detailed Alternative Models

Some alternative models to 814S208BKILF include: - 814S209BKILF - 814S207BKILF - 814S210BKILF - 814S206BKILF - 814S211BKILF

5 Common Technical Questions and Answers

1. Q: What is the maximum clock frequency supported by 814S208BKILF? A: The maximum clock frequency is 100 MHz.

2. Q: What is the operating voltage range of this microcontroller? A: The operating voltage is 3.3V.

3. Q: How much flash memory does it have? A: It has a flash memory size of 256 KB.

4. Q: Can I use multiple communication interfaces simultaneously? A: Yes, the microcontroller supports UART, SPI, and I2C interfaces that can be used concurrently.

5. Q: What is the temperature range within which this microcontroller operates? A: The operating temperature range is -