IDT, Integrated Device Technology Inc
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
74FCT16374ETPVG8
Ver detalhes DataSheets

Encyclopedia Entry: 74FCT16374ETPVG8

Product Overview

Category

The 74FCT16374ETPVG8 belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This product is commonly used in digital electronic systems for storing and transferring data. It serves as a latch or register, allowing the storage and retrieval of binary information.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • Robustness against noise and interference

Package

The 74FCT16374ETPVG8 is available in a standard 48-pin TSSOP (Thin Shrink Small Outline Package) package. This package offers compactness and ease of integration into circuit boards.

Essence

The essence of the 74FCT16374ETPVG8 lies in its ability to store and transmit digital data reliably and efficiently within electronic systems.

Packaging/Quantity

The product is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: TTL, CMOS
  • Maximum Clock Frequency: 100 MHz
  • Number of Flip-Flops: 16
  • Output Type: Tri-State

Detailed Pin Configuration

The 74FCT16374ETPVG8 has a total of 48 pins, each serving a specific function. Here is a detailed pin configuration:

  1. Pin 1: Data Input (D0)
  2. Pin 2: Data Input (D1)
  3. Pin 3: Data Input (D2)
  4. Pin 4: Data Input (D3)
  5. Pin 5: Data Input (D4)
  6. Pin 6: Data Input (D5)
  7. Pin 7: Data Input (D6)
  8. Pin 8: Data Input (D7)
  9. Pin 9: Data Input (D8)
  10. Pin 10: Data Input (D9)
  11. Pin 11: Data Input (D10)
  12. Pin 12: Data Input (D11)
  13. Pin 13: Data Input (D12)
  14. Pin 14: Data Input (D13)
  15. Pin 15: Data Input (D14)
  16. Pin 16: Data Input (D15)
  17. Pin 17: Clock Input (CLK)
  18. Pin 18: Output Enable (OE)
  19. Pin 19: Master Reset (MR)
  20. Pin 20: GND (Ground)
  21. Pin 21: Data Output (Q0)
  22. Pin 22: Data Output (Q1)
  23. Pin 23: Data Output (Q2)
  24. Pin 24: Data Output (Q3)
  25. Pin 25: Data Output (Q4)
  26. Pin 26: Data Output (Q5)
  27. Pin 27: Data Output (Q6)
  28. Pin 28: Data Output (Q7)
  29. Pin 29: Data Output (Q8)
  30. Pin 30: Data Output (Q9)
  31. Pin 31: Data Output (Q10)
  32. Pin 32: Data Output (Q11)
  33. Pin 33: Data Output (Q12)
  34. Pin 34: Data Output (Q13)
  35. Pin 35: Data Output (Q14)
  36. Pin 36: Data Output (Q15)
  37. Pin 37: Output Enable (OE)
  38. Pin 38: Clock Input (CLK)
  39. Pin 39: Data Output (Q16)
  40. Pin 40: Data Output (Q17)
  41. Pin 41: Data Output (Q18)
  42. Pin 42: Data Output (Q19)
  43. Pin 43: Data Output (Q20)
  44. Pin 44: Data Output (Q21)
  45. Pin 45: Data Output (Q22)
  46. Pin 46: Data Output (Q23)
  47. Pin 47: VCC (Power Supply)
  48. Pin 48: Master Reset (MR)

Functional Features

  • Data Storage: The 74FCT16374ETPVG8 can store digital data in its flip-flops, allowing for temporary or permanent storage.
  • Data Transfer: It enables the transfer of stored data from one circuit to another through its output pins.
  • Tri-State Outputs: The tri-state outputs provide flexibility by allowing multiple devices to share a common bus without interference.

Advantages

Liste 10 perguntas e respostas comuns relacionadas à aplicação de 74FCT16374ETPVG8 em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of 74FCT16374ETPVG8 in technical solutions:

  1. Q: What is the 74FCT16374ETPVG8? A: The 74FCT16374ETPVG8 is a 16-bit D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of using the 74FCT16374ETPVG8 in a technical solution? A: The 74FCT16374ETPVG8 can be used for data storage, signal synchronization, and as a buffer between different parts of a circuit.

  3. Q: What is the maximum operating frequency of the 74FCT16374ETPVG8? A: The maximum operating frequency of the 74FCT16374ETPVG8 is typically around 200 MHz.

  4. Q: How many inputs and outputs does the 74FCT16374ETPVG8 have? A: The 74FCT16374ETPVG8 has 16 inputs and 16 outputs.

  5. Q: Can the 74FCT16374ETPVG8 be used in both synchronous and asynchronous applications? A: Yes, the 74FCT16374ETPVG8 can be used in both synchronous and asynchronous applications.

  6. Q: What is the power supply voltage range for the 74FCT16374ETPVG8? A: The power supply voltage range for the 74FCT16374ETPVG8 is typically between 4.5V and 5.5V.

  7. Q: Does the 74FCT16374ETPVG8 support 3-state outputs? A: Yes, the 74FCT16374ETPVG8 supports 3-state outputs, which allows multiple devices to share a common bus.

  8. Q: Can the 74FCT16374ETPVG8 be cascaded to increase the number of flip-flops? A: Yes, multiple 74FCT16374ETPVG8 chips can be cascaded together to increase the number of flip-flops in a circuit.

  9. Q: What is the typical propagation delay of the 74FCT16374ETPVG8? A: The typical propagation delay of the 74FCT16374ETPVG8 is around 5 ns.

  10. Q: Is the 74FCT16374ETPVG8 available in different package options? A: Yes, the 74FCT16374ETPVG8 is available in various package options, such as TSSOP and SSOP.

Please note that specific details may vary depending on the manufacturer's datasheet and specifications.