Veja as especificações para detalhes do produto.
FT24C512A-ETR-T
Product Overview
Category
FT24C512A-ETR-T belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.
Use
This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
Characteristics
- Non-volatile memory: The FT24C512A-ETR-T retains stored data even when power is removed.
- High storage capacity: This chip has a capacity of 512 kilobits (64 kilobytes).
- Electrically erasable and programmable: The data can be easily modified using electrical signals.
- Low power consumption: The FT24C512A-ETR-T operates on low power, making it suitable for battery-powered devices.
- High reliability: It offers excellent data retention and endurance characteristics.
Package
The FT24C512A-ETR-T is available in an industry-standard 8-pin SOIC (Small Outline Integrated Circuit) package.
Essence
The essence of this product lies in its ability to provide reliable and non-volatile data storage in electronic devices.
Packaging/Quantity
The FT24C512A-ETR-T is typically packaged in reels containing 2500 units per reel.
Specifications
- Memory Capacity: 512 kilobits (64 kilobytes)
- Interface: I2C (Inter-Integrated Circuit)
- Operating Voltage: 1.7V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Write Cycle Endurance: 1 million cycles
- Data Retention: 100 years
Detailed Pin Configuration
The FT24C512A-ETR-T has the following pin configuration:
- A0: Address Input
- A1: Address Input
- A2: Address Input
- SDA: Serial Data Input/Output
- SCL: Serial Clock Input
- WP: Write Protect Input
- VCC: Power Supply
- GND: Ground
Functional Features
- Random and sequential read modes
- Page write mode for efficient data programming
- Software write protection using the WP pin
- Built-in hardware write protection for entire memory array
- Acknowledge polling and interrupt functions for communication status monitoring
Advantages and Disadvantages
Advantages
- High storage capacity
- Low power consumption
- Excellent data retention and endurance characteristics
- Easy to use and program
- Wide operating voltage range
Disadvantages
- Limited write cycle endurance compared to some other non-volatile memory technologies
- Relatively higher cost compared to certain alternatives
Working Principles
The FT24C512A-ETR-T utilizes electrically erasable and programmable memory cells to store data. It employs I2C interface for communication with the host device. The chip operates by sending and receiving serial data and clock signals through the SDA and SCL pins.
Detailed Application Field Plans
The FT24C512A-ETR-T is widely used in various applications, including but not limited to: - Microcontrollers and embedded systems - Industrial automation - Automotive electronics - Consumer electronics - Medical devices - Communication equipment
Detailed and Complete Alternative Models
Some alternative models to the FT24C512A-ETR-T include: - AT24C512C-SSHL-T by Microchip Technology Inc. - CAT24C512WI-GT3 by ON Semiconductor - M24C512-WMN6TP by STMicroelectronics
These alternative models offer similar functionality and specifications, providing options for different design requirements.
In conclusion, the FT24C512A-ETR-T is a high-capacity EEPROM chip that offers reliable and non-volatile data storage. With its low power consumption and wide operating voltage range, it finds applications in various electronic devices across different industries.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de FT24C512A-ETR-T em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of FT24C512A-ETR-T in technical solutions:
Q: What is the FT24C512A-ETR-T? A: The FT24C512A-ETR-T is a 512Kbit (64K x 8) serial I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.
Q: What is the purpose of using the FT24C512A-ETR-T in technical solutions? A: The FT24C512A-ETR-T is commonly used for storing small amounts of non-volatile data, such as configuration settings or calibration data, in various electronic devices.
Q: How does the FT24C512A-ETR-T connect to a microcontroller or other devices? A: The FT24C512A-ETR-T uses the I2C (Inter-Integrated Circuit) protocol for communication, which requires only two wires (SDA and SCL) to connect to a microcontroller or other devices.
Q: What is the maximum data storage capacity of the FT24C512A-ETR-T? A: The FT24C512A-ETR-T has a storage capacity of 512 kilobits, which is equivalent to 64 kilobytes or 65,536 bytes.
Q: Can the FT24C512A-ETR-T be easily integrated into existing circuit designs? A: Yes, the FT24C512A-ETR-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package, making it easy to integrate into existing circuit designs.
Q: Is the FT24C512A-ETR-T compatible with both 3.3V and 5V systems? A: Yes, the FT24C512A-ETR-T is designed to work with both 3.3V and 5V systems, making it versatile for various applications.
Q: Can the FT24C512A-ETR-T operate in extreme temperature conditions? A: Yes, the FT24C512A-ETR-T has an extended temperature range of -40°C to +85°C, allowing it to function reliably in harsh environments.
Q: Does the FT24C512A-ETR-T support hardware write protection? A: Yes, the FT24C512A-ETR-T provides a built-in write protection feature that can be enabled or disabled using control registers.
Q: What is the typical data retention time of the FT24C512A-ETR-T? A: The FT24C512A-ETR-T has a typical data retention time of 10 years, ensuring long-term storage of critical information.
Q: Are there any application notes or example code available for using the FT24C512A-ETR-T? A: Yes, the manufacturer provides application notes and example code that can help developers integrate and utilize the FT24C512A-ETR-T effectively in their projects.
Please note that these answers are general and may vary depending on specific implementation details and requirements.