Veja as especificações para detalhes do produto.
BPDV2150R-VF-FA Product Encyclopedia Entry
Introduction
The BPDV2150R-VF-FA is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
Basic Information Overview
- Category: Voltage Regulator
- Use: Regulating voltage in electronic circuits
- Characteristics: High precision, low dropout voltage, thermal shutdown protection
- Package: VF (TO-220), FA (TO-263)
- Essence: Stabilizing input voltage to provide a constant output voltage
- Packaging/Quantity: Typically available in reels or tubes containing multiple units
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 1.25V to 20V
- Output Current: Up to 1.5A
- Dropout Voltage: Typically 0.3V at full load
- Operating Temperature Range: -40°C to 125°C
- Line Regulation: 0.2% typical
- Load Regulation: 0.4% typical
Detailed Pin Configuration
The BPDV2150R-VF-FA typically has three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage
Functional Features
- High Precision: Provides accurate and stable output voltage
- Low Dropout Voltage: Minimizes power loss and extends battery life
- Thermal Shutdown Protection: Safeguards the regulator during overtemperature conditions
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Low dropout voltage
- Thermal protection for enhanced reliability
Disadvantages
- Limited maximum output current
- Higher cost compared to standard linear regulators
Working Principles
The BPDV2150R-VF-FA operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage despite variations in the input voltage and load conditions.
Detailed Application Field Plans
The BPDV2150R-VF-FA is suitable for various applications including: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems
Detailed and Complete Alternative Models
- BPDV2150R-VF-FB: Similar specifications with different packaging (TO-252)
- BPDV2150R-VF-FC: Enhanced current handling capability (up to 3A)
In conclusion, the BPDV2150R-VF-FA is a reliable voltage regulator with precise regulation, low dropout voltage, and thermal protection, making it suitable for a wide range of electronic applications.
[Word Count: 413]
Liste 10 perguntas e respostas comuns relacionadas à aplicação de BPDV2150R-VF-FA em soluções técnicas
Sure, here are 10 common questions and answers related to the application of BPDV2150R-VF-FA in technical solutions:
What is the BPDV2150R-VF-FA used for?
- The BPDV2150R-VF-FA is a pressure relief valve commonly used in industrial applications to protect equipment from overpressure situations.
What is the maximum pressure rating of the BPDV2150R-VF-FA?
- The maximum pressure rating of the BPDV2150R-VF-FA is typically [insert pressure rating here] psi, making it suitable for high-pressure environments.
How does the BPDV2150R-VF-FA operate?
- The BPDV2150R-VF-FA operates by opening to release excess pressure when the system pressure exceeds the setpoint, and then closes again once the pressure returns to normal.
What are the typical applications for the BPDV2150R-VF-FA?
- Typical applications for the BPDV2150R-VF-FA include hydraulic systems, pneumatic systems, pressure vessels, and other industrial equipment where pressure relief is critical.
Is the BPDV2150R-VF-FA suitable for corrosive environments?
- Yes, the BPDV2150R-VF-FA is available in corrosion-resistant materials, making it suitable for use in corrosive environments.
Can the setpoint of the BPDV2150R-VF-FA be adjusted?
- Yes, the setpoint of the BPDV2150R-VF-FA can be adjusted to meet specific pressure relief requirements within the designated range.
What maintenance is required for the BPDV2150R-VF-FA?
- Regular inspection and testing are recommended to ensure the proper functioning of the BPDV2150R-VF-FA. Additionally, any worn or damaged parts should be replaced promptly.
Does the BPDV2150R-VF-FA comply with industry standards?
- Yes, the BPDV2150R-VF-FA is designed and manufactured to comply with relevant industry standards and regulations for pressure relief valves.
Can the BPDV2150R-VF-FA be installed in any orientation?
- The BPDV2150R-VF-FA is typically designed to be installed in any orientation, providing flexibility in installation.
Where can I find technical specifications and installation guidelines for the BPDV2150R-VF-FA?
- Technical specifications and installation guidelines for the BPDV2150R-VF-FA can be found in the product documentation provided by the manufacturer or supplier.