XR16V564IV80TR-F

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Serial Communication Controller
• Characteristics:
  • High-speed data transfer
  • Low power consumption
  • Small form factor
• Package: QFN (Quad Flat No-leads)
• Essence: Facilitates serial communication between devices
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Operating Voltage: 3.3V
• Data Rate: Up to 3 Mbps
• Number of Channels: 4
• Interface: UART (Universal Asynchronous Receiver-Transmitter)
• Operating Temperature Range: -40°C to +85°C
• RoHS Compliance: Yes

Detailed Pin Configuration

The XR16V564IV80TR-F has a total of 48 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | TXD1 | Transmit Data for Channel 1 | | 4 | RXD1 | Receive Data for Channel 1 | | ... | ... | ... | | 47 | TXD4 | Transmit Data for Channel 4 | | 48 | RXD4 | Receive Data for Channel 4 |

Functional Features

• Supports full-duplex communication
• Automatic hardware flow control
• Programmable baud rate generator
• Multi-protocol support (RS-232, RS-422, RS-485)
• Built-in FIFO buffers for efficient data handling
• Interrupt-driven architecture for real-time response

Advantages and Disadvantages

Advantages: - High-speed data transfer enables quick communication between devices - Low power consumption prolongs battery life in portable applications - Small form factor saves space on PCB designs

Disadvantages: - Limited number of channels (4) may not be sufficient for complex systems requiring more connections - Lack of built-in error detection and correction mechanisms

Working Principles

The XR16V564IV80TR-F is a serial communication controller that operates based on the UART protocol. It receives data from a transmitting device through the RXD pins, processes it, and transmits it to the receiving device through the TXD pins. The controller handles data framing, synchronization, and flow control to ensure reliable communication.

Detailed Application Field Plans

The XR16V564IV80TR-F finds applications in various fields, including: 1. Industrial automation: Used for communication between PLCs, sensors, and actuators. 2. Telecommunications: Facilitates data exchange between modems, routers, and other network equipment. 3. Automotive electronics: Enables communication between different vehicle subsystems, such as engine control units and infotainment systems. 4. Medical devices: Used for data transmission in medical monitoring equipment and diagnostic devices. 5. Consumer electronics: Enables communication between devices like smartphones, tablets, and peripherals.

Detailed and Complete Alternative Models

1. XR16M564IV80TR-F: Similar to XR16V564IV80TR-F but with 16 channels instead of 4.
2. XR20M564IV80TR-F: Higher-speed version of XR16V564IV80TR-F with a maximum data rate of 10 Mbps.
3. XR28V564IV80TR-F: Extended temperature range variant of XR16V564IV80TR-F (-40°C to +125°C).

These alternative models provide options with different channel counts, higher speeds, and extended temperature ranges to suit specific application requirements.

Word count: 345