Eaton
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
ER4P-100J3PB
Ver detalhes DataSheets

ER4P-100J3PB

Product Overview

Category

The ER4P-100J3PB belongs to the category of electronic components.

Use

It is used in electronic circuits for various applications such as filtering, tuning, and impedance matching.

Characteristics

  • High precision
  • Low tolerance
  • Wide frequency range

Package

The ER4P-100J3PB is typically packaged in a small, rectangular ceramic or plastic casing.

Essence

This component serves as a crucial element in electronic circuit design, providing precise impedance characteristics.

Packaging/Quantity

The ER4P-100J3PB is commonly available in reels containing a specific quantity, typically ranging from hundreds to thousands per reel.

Specifications

  • Inductance: 100µH
  • Tolerance: ±5%
  • Frequency Range: 1kHz - 10MHz
  • Operating Temperature: -40°C to 125°C
  • Rated Current: 500mA

Detailed Pin Configuration

The ER4P-100J3PB features two pins located at opposite ends of the component, allowing for easy integration into circuit boards.

Functional Features

  • Precise impedance control
  • Wide frequency response
  • Compact size for space-constrained designs

Advantages

  • High precision
  • Wide frequency range
  • Compact form factor

Disadvantages

  • Limited current handling capacity
  • Sensitive to mechanical stress

Working Principles

The ER4P-100J3PB operates based on the principles of electromagnetic induction, where changes in current flow induce a voltage across the component, resulting in the desired impedance characteristics.

Detailed Application Field Plans

The ER4P-100J3PB finds extensive use in the following applications: - RF filters - Oscillator circuits - Audio equipment

Detailed and Complete Alternative Models

  • ER4P-101J3PB
  • ER4P-100J2PB
  • ER4P-100J3PC

In conclusion, the ER4P-100J3PB is a vital electronic component with precise impedance characteristics, suitable for a wide range of applications in electronic circuit design.

[Word count: 314]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de ER4P-100J3PB em soluções técnicas

  1. What is ER4P-100J3PB?

    • ER4P-100J3PB is a specific model of passive electronic component known as a resistor, commonly used in electrical circuits to limit current flow and adjust signal levels.

  2. What are the key specifications of ER4P-100J3PB?

    • The key specifications of ER4P-100J3PB include its resistance value (100 ohms), power rating, tolerance, and temperature coefficient.

  3. In what technical solutions can ER4P-100J3PB be applied?

    • ER4P-100J3PB can be applied in various technical solutions such as voltage dividers, filter networks, sensor interfaces, and signal conditioning circuits.

  4. What is the power rating of ER4P-100J3PB?

    • The power rating of ER4P-100J3PB is typically expressed in watts, indicating the maximum amount of power it can dissipate without damage.

  5. What is the tolerance of ER4P-100J3PB?

    • The tolerance of ER4P-100J3PB refers to the allowable deviation from its specified resistance value, typically expressed as a percentage.

  6. How does ER4P-100J3PB contribute to voltage dividers?

    • ER4P-100J3PB can be used in voltage divider circuits to create a specific output voltage from a higher input voltage, based on its resistance value and the values of other components in the circuit.

  7. Can ER4P-100J3PB be used in high-frequency applications?

    • ER4P-100J3PB may have limitations in high-frequency applications due to its inherent parasitic capacitance and inductance, which can affect its performance at higher frequencies.

  8. What are the environmental considerations for using ER4P-100J3PB?

    • When using ER4P-100J3PB in technical solutions, factors such as temperature range, humidity, and potential exposure to chemicals or contaminants should be taken into account to ensure reliable performance.

  9. How does ER4P-100J3PB contribute to signal conditioning circuits?

    • In signal conditioning circuits, ER4P-100J3PB can be utilized to attenuate or filter signals, adjust signal levels, or provide impedance matching to optimize signal integrity.

  10. Are there alternative components that can be used in place of ER4P-100J3PB?

    • Depending on the specific requirements of a technical solution, alternative resistors with different specifications or technologies may be considered as substitutes for ER4P-100J3PB.