PI49FCT3803L

Overview

Category

The PI49FCT3803L belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal transmission and processing.

Characteristics

• High-speed operation
• Low power consumption
• Wide operating voltage range
• Small package size

Package

The PI49FCT3803L is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the PI49FCT3803L lies in its ability to efficiently transmit and process signals in electronic devices.

Packaging/Quantity

The PI49FCT3803L is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications and Parameters

• Operating Voltage: 2.5V - 5.5V
• Input Voltage Range: 0V - VCC
• Output Voltage Range: 0V - VCC
• Operating Temperature Range: -40°C to +85°C
• Input Capacitance: 4pF (typical)
• Output Capacitance: 6pF (typical)

Pin Configuration

The PI49FCT3803L has a total of 8 pins, which are labeled as follows:

1. GND (Ground)
2. A (Input A)
3. B (Input B)
4. C (Input C)
5. D (Input D)
6. Y (Output Y)
7. VCC (Power Supply)
8. GND (Ground)

Functional Characteristics

The PI49FCT3803L is a quad 2-input multiplexer with output enable. It features low propagation delay and high-speed operation, making it suitable for applications requiring fast signal switching. The device operates within a wide voltage range and consumes low power, making it energy-efficient.

Advantages and Disadvantages

Advantages

• High-speed operation
• Low power consumption
• Wide operating voltage range
• Small package size

Disadvantages

• Limited number of inputs (quad 2-input)

Applicable Range of Products

The PI49FCT3803L is commonly used in various electronic devices, including but not limited to: - Computers - Telecommunications equipment - Consumer electronics - Industrial control systems

Working Principles

The PI49FCT3803L operates by selectively routing one of the four input signals (A, B, C, D) to the output pin (Y) based on the control signal. The output enable pin (OE) controls the output state, allowing for efficient signal transmission and processing.

Detailed Application Field Plans

The PI49FCT3803L can be applied in the following fields:

1. Data communication systems: Used for signal multiplexing and switching in high-speed data transmission.
2. Audio/video equipment: Enables signal routing and selection in audio/video processing circuits.
3. Industrial automation: Facilitates signal processing and control in industrial control systems.
4. Networking devices: Supports signal routing and switching in network switches and routers.
5. Automotive electronics: Used for signal multiplexing and processing in automotive control systems.

Detailed Alternative Models

Some alternative models to the PI49FCT3803L include: - SN74HC157N - CD4051BE - MC14051BCP - 74HCT153D - HEF4051BP

5 Common Technical Questions and Answers

1. Q: What is the maximum operating voltage for the PI49FCT3803L? A: The PI49FCT3803L can operate within a voltage range of 2.5V to 5.5V.

2. Q: How many inputs does the PI49FCT3803L support? A: The PI49FCT3803L supports four inputs (A, B, C, D).

3. Q: What is the typical input capacitance of the PI49FCT3803L? A: The typical input capacitance of the PI49FCT3803L is 4pF.

4. Q: Can the PI49FCT3803L be used in automotive applications? A: Yes, the PI49FCT3803L is suitable for use in automotive electronics.

5. Q: What is the operating temperature range of the PI49FCT3803L? A: The PI49FCT3803L can operate within a temperature range of -40°C to +85°C.

This concludes the encyclopedia entry for the PI49FCT3803L.