Diodes Incorporated
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
BC817-16
Ver detalhes DataSheets

BC817-16 Transistor

Product Overview

Category

The BC817-16 transistor belongs to the category of small signal NPN transistors.

Use

It is commonly used for amplification and switching purposes in electronic circuits.

Characteristics

  • Low power, low voltage applications
  • High current gain
  • Small package size

Package

The BC817-16 is typically available in a SOT-23 package.

Essence

This transistor is essential for amplifying weak signals and controlling larger currents in electronic devices.

Packaging/Quantity

The BC817-16 is usually sold in reels or tubes containing multiple units, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 45V
  • Collector-Emitter Voltage (VCEO): 45V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (Ptot): 330mW
  • Transition Frequency (ft): 100MHz

Detailed Pin Configuration

The BC817-16 transistor has three pins: emitter, base, and collector. The pinout configuration is as follows: - Emitter (E) - Pin 1 - Base (B) - Pin 2 - Collector (C) - Pin 3

Functional Features

The BC817-16 transistor offers the following functional features: - High current gain (hFE) - Low saturation voltage - Fast switching speed

Advantages and Disadvantages

Advantages

  • Small package size
  • High current gain
  • Suitable for low power applications

Disadvantages

  • Limited voltage and current ratings
  • Sensitive to temperature variations

Working Principles

The BC817-16 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small input signal at the base terminal.

Detailed Application Field Plans

The BC817-16 transistor finds extensive use in various applications, including: - Audio amplifiers - Signal processing circuits - Switching circuits - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to the BC817-16 transistor include: - BC846 - 2N3904 - 2SC945

In conclusion, the BC817-16 transistor is a versatile component that serves as a fundamental building block in electronic circuits, offering high current gain and compact size. Its applications span across a wide range of electronic devices, making it an indispensable part of modern electronics.

[Word Count: 314]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de BC817-16 em soluções técnicas

  1. What is the BC817-16 transistor used for?

    • The BC817-16 is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the key specifications of the BC817-16 transistor?

    • The BC817-16 transistor typically has a maximum collector current (Ic) of 500mA, a maximum collector-base voltage (Vcbo) of 45V, and a maximum DC current gain (hfe) of 110-800.

  3. How can I use the BC817-16 transistor as a switch?

    • To use the BC817-16 as a switch, you can connect the base of the transistor to a control signal and use the collector-emitter path to control a higher current or voltage load.

  4. What are some common applications of the BC817-16 transistor?

    • The BC817-16 transistor is commonly used in audio amplifiers, signal processing circuits, motor control, LED drivers, and general purpose switching circuits.

  5. What are the typical operating conditions for the BC817-16 transistor?

    • The BC817-16 transistor is typically operated within a temperature range of -55°C to 150°C and with a maximum power dissipation of around 625mW.

  6. How do I calculate the base resistor for driving the BC817-16 transistor?

    • The base resistor can be calculated using Ohm's law and the base current required for the desired collector current and transistor gain.

  7. Can the BC817-16 transistor be used in high-frequency applications?

    • While the BC817-16 can be used in moderate frequency applications, it may not be suitable for very high-frequency designs due to its transition frequency and capacitance characteristics.

  8. What are the typical package options for the BC817-16 transistor?

    • The BC817-16 transistor is available in various packages such as SOT-23, SOT-323, and SC-70, making it suitable for different PCB layout requirements.

  9. Are there any important considerations when designing with the BC817-16 transistor?

    • It's important to consider the maximum ratings, thermal characteristics, and voltage/current requirements of the circuit when designing with the BC817-16 to ensure reliable operation.

  10. Where can I find detailed datasheets and application notes for the BC817-16 transistor?

    • Detailed datasheets and application notes for the BC817-16 transistor can be found on semiconductor manufacturer websites, distributor platforms, and electronics component databases.