Veja as especificações para detalhes do produto.
KBPC1004W-G
Introduction
The KBPC1004W-G is a crucial component in the field of power electronics, specifically within the category of bridge rectifiers. This device plays a significant role in converting alternating current (AC) to direct current (DC) and finds widespread use in various electronic applications.
Basic Information Overview
- Category: Bridge Rectifier
- Use: Converts AC to DC
- Characteristics: High efficiency, low forward voltage drop
- Package: KBPC-W package
- Essence: Essential for power conversion
- Packaging/Quantity: Varies by manufacturer
Specifications
- Maximum Average Forward Current: 10A
- Peak Repetitive Reverse Voltage: 400V
- Maximum RMS Voltage: 280V
- Forward Voltage Drop: 1.1V
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The KBPC1004W-G typically consists of four pins, with two for input and two for output. The pin configuration is as follows: - Pin 1: AC Input - Pin 2: AC Input - Pin 3: DC Output - Pin 4: DC Output
Functional Features
- Efficient AC to DC conversion
- Low forward voltage drop
- Reliable performance under varying loads
Advantages and Disadvantages
Advantages
- High efficiency
- Compact design
- Suitable for high-frequency applications
Disadvantages
- Limited maximum current capacity
- Sensitive to voltage spikes
Working Principles
The KBPC1004W-G operates on the principle of rectification, where it utilizes a combination of diodes to convert the incoming AC signal into a smooth DC output. This process involves the diodes conducting during alternate half-cycles of the input AC waveform, resulting in a unidirectional flow of current.
Detailed Application Field Plans
The KBPC1004W-G is extensively used in various applications, including: - Power supplies - Motor drives - Battery chargers - Welding equipment
Detailed and Complete Alternative Models
- KBPC1002W-G
- KBPC1006W-G
- KBPC1010W-G
In conclusion, the KBPC1004W-G serves as an essential component in power electronics, offering efficient AC to DC conversion with its unique characteristics and functional features.
Word Count: 314
Liste 10 perguntas e respostas comuns relacionadas à aplicação de KBPC1004W-G em soluções técnicas
Sure, here are 10 common questions and answers related to the application of KBPC1004W-G in technical solutions:
Question: What is the maximum repetitive peak reverse voltage of KBPC1004W-G?
Answer: The maximum repetitive peak reverse voltage of KBPC1004W-G is 400V.Question: What is the maximum average forward rectified current for KBPC1004W-G?
Answer: The maximum average forward rectified current for KBPC1004W-G is 10A.Question: What is the maximum peak forward surge current for KBPC1004W-G at 8.3ms single half sine-wave?
Answer: The maximum peak forward surge current for KBPC1004W-G at 8.3ms single half sine-wave is 200A.Question: What is the operating junction temperature range for KBPC1004W-G?
Answer: The operating junction temperature range for KBPC1004W-G is -55°C to +150°C.Question: Can KBPC1004W-G be used in bridge rectifier applications?
Answer: Yes, KBPC1004W-G can be used in bridge rectifier applications.Question: What is the package type of KBPC1004W-G?
Answer: KBPC1004W-G comes in a standard 4-pin single in-line package (SIP).Question: Is KBPC1004W-G suitable for use in power supplies and DC motor controls?
Answer: Yes, KBPC1004W-G is suitable for use in power supplies and DC motor controls.Question: Does KBPC1004W-G require any special heat sinking or mounting considerations?
Answer: KBPC1004W-G does not require any special heat sinking or mounting considerations under normal operating conditions.Question: What is the typical forward voltage drop of KBPC1004W-G at 5A?
Answer: The typical forward voltage drop of KBPC1004W-G at 5A is 1.1V.Question: Can KBPC1004W-G handle high frequency and high current applications?
Answer: Yes, KBPC1004W-G is capable of handling high frequency and high current applications within its specified ratings.