Advanced Linear Devices Inc.
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
ALD114935SAL
Ver detalhes DataSheets

ALD114935SAL

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: SOT-223
Essence: Regulates voltage with minimal dropout
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 15V
  • Output Voltage Range: 1.25V to 13.8V
  • Dropout Voltage: 300mV at 1A
  • Output Current: 1A
  • Line Regulation: 0.2%
  • Load Regulation: 0.4%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages: - Wide input voltage range - Stable output voltage - Thermal protection for safety - Small package size

Disadvantages: - Limited output current compared to some alternatives - Higher dropout voltage than certain competitors

Working Principles

The ALD114935SAL is a linear voltage regulator that maintains a stable output voltage by comparing the reference voltage with the divided-down output voltage. It adjusts the pass device to maintain the desired output voltage.

Detailed Application Field Plans

This voltage regulator is suitable for various applications such as battery-powered devices, instrumentation, automotive electronics, and portable consumer products. Its low dropout voltage and high accuracy make it ideal for systems requiring a stable power supply.

Detailed and Complete Alternative Models

  1. LM1117-3.3
  2. LT1763-3.3
  3. ADP3338AKCZ-3.3-R7

1100 words required

This content provides a comprehensive overview of the ALD114935SAL, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. If you need further details or additional information, feel free to ask!

Liste 10 perguntas e respostas comuns relacionadas à aplicação de ALD114935SAL em soluções técnicas

  1. What is ALD114935SAL?

    • ALD114935SAL is a chemical compound commonly used as a corrosion inhibitor in technical solutions.

  2. How does ALD114935SAL work as a corrosion inhibitor?

    • ALD114935SAL forms a protective layer on metal surfaces, preventing corrosion by inhibiting the interaction between the metal and its environment.

  3. What types of metals can ALD114935SAL protect from corrosion?

    • ALD114935SAL is effective in protecting a wide range of metals including steel, aluminum, copper, and their alloys.

  4. Is ALD114935SAL compatible with other chemicals commonly used in technical solutions?

    • Yes, ALD114935SAL is generally compatible with other chemicals used in technical solutions, but it's always best to conduct compatibility tests before use.

  5. What concentration of ALD114935SAL is typically used in technical solutions?

    • The concentration of ALD114935SAL used can vary depending on the specific application, but typical concentrations range from 0.1% to 5%.

  6. Does ALD114935SAL have any environmental or safety considerations?

    • ALD114935SAL should be handled with care and proper safety measures should be followed. It's important to refer to the material safety data sheet (MSDS) for specific information on handling and disposal.

  7. Can ALD114935SAL be used in high-temperature applications?

    • Yes, ALD114935SAL is suitable for use in high-temperature applications, but the specific temperature limits should be considered based on the manufacturer's recommendations.

  8. What is the shelf life of ALD114935SAL?

    • The shelf life of ALD114935SAL can vary depending on storage conditions, but it typically ranges from 1 to 2 years when stored in a cool, dry place away from direct sunlight.

  9. Are there any known interactions between ALD114935SAL and specific materials or coatings?

    • It's important to test for compatibility with specific materials or coatings before using ALD114935SAL, as some interactions may occur.

  10. What are the recommended application methods for ALD114935SAL in technical solutions?

    • ALD114935SAL can be applied through methods such as spraying, dipping, or brushing, depending on the specific requirements of the application.