Adesto Technologies
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
AT25DF011-SSHNGU-T
Ver detalhes DataSheets

AT25DF011-SSHNGU-T

Product Overview

Category

AT25DF011-SSHNGU-T belongs to the category of Serial Flash Memory.

Use

It is primarily used for storing and retrieving digital data in electronic devices.

Characteristics

  • Non-volatile memory: The stored data is retained even when power is removed.
  • High-speed operation: Enables fast read and write operations.
  • Low power consumption: Optimized for energy efficiency.
  • Small form factor: Compact size suitable for integration into various devices.

Package

AT25DF011-SSHNGU-T is available in a surface mount 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of AT25DF011-SSHNGU-T lies in its ability to provide reliable and efficient storage solutions for electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of AT25DF011-SSHNGU-T units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory capacity: 1 Megabit (128 Kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 20 years
  • Erase/Program cycles: 100,000 cycles

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/SO)
  4. Write Protect (/WP)
  5. Hold (/HOLD)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. NC (No Connection)

Functional Features

  • Fast read and write operations
  • Sector erase and program capability
  • Software and hardware protection mechanisms
  • Deep power-down mode for ultra-low power consumption
  • Flexible programming options

Advantages and Disadvantages

Advantages

  • High-speed operation enables quick data access.
  • Low power consumption prolongs battery life in portable devices.
  • Small form factor allows for easy integration into space-constrained designs.
  • Reliable data retention ensures long-term storage of critical information.

Disadvantages

  • Limited memory capacity compared to higher-capacity flash memory options.
  • Erase/Program cycle limitations may restrict certain applications requiring frequent data modifications.

Working Principles

AT25DF011-SSHNGU-T utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It employs a combination of floating gate and tunnel oxide technology to store and retrieve digital data. The SPI interface facilitates high-speed data transfer between the memory and the host, while various protection mechanisms ensure data integrity and security.

Detailed Application Field Plans

AT25DF011-SSHNGU-T finds application in various electronic devices, including but not limited to: - Consumer electronics (e.g., smartphones, tablets) - Automotive systems (e.g., infotainment, instrument clusters) - Industrial equipment (e.g., control systems, sensors) - Medical devices (e.g., patient monitoring, diagnostic equipment)

Detailed and Complete Alternative Models

  1. AT25DF021A-SSHNGU-T: 2 Megabit Serial Flash Memory
  2. AT25DF041A-SSHNGU-T: 4 Megabit Serial Flash Memory
  3. AT25DF081A-SSHNGU-T: 8 Megabit Serial Flash Memory
  4. AT25DF161A-SSHNGU-T: 16 Megabit Serial Flash Memory
  5. AT25DF321A-SSHNGU-T: 32 Megabit Serial Flash Memory
  6. AT25DF641A-SSHNGU-T: 64 Megabit Serial Flash Memory

These alternative models offer increased memory capacity while maintaining similar characteristics and functionality to AT25DF011-SSHNGU-T.

Note: The word count of this entry is 408 words.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de AT25DF011-SSHNGU-T em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of AT25DF011-SSHNGU-T:

  1. Q: What is the AT25DF011-SSHNGU-T? A: The AT25DF011-SSHNGU-T is a serial flash memory chip manufactured by Adesto Technologies. It has a capacity of 1 megabit (128 kilobytes) and operates on a Serial Peripheral Interface (SPI).

  2. Q: What are some typical applications for the AT25DF011-SSHNGU-T? A: This flash memory chip is commonly used in various technical solutions, including consumer electronics, industrial automation, automotive systems, and IoT devices.

  3. Q: What voltage does the AT25DF011-SSHNGU-T operate at? A: The AT25DF011-SSHNGU-T operates at a supply voltage range of 2.7V to 3.6V.

  4. Q: What is the maximum data transfer rate of the AT25DF011-SSHNGU-T? A: The maximum data transfer rate of this flash memory chip is 85 megabits per second (Mbps).

  5. Q: Does the AT25DF011-SSHNGU-T support both read and write operations? A: Yes, it supports both read and write operations, allowing you to store and retrieve data from the memory.

  6. Q: Can I use the AT25DF011-SSHNGU-T as a boot device? A: Yes, this flash memory chip can be used as a boot device in many embedded systems, enabling the system to start up and load the initial program code.

  7. Q: Is the AT25DF011-SSHNGU-T resistant to shock and vibration? A: Yes, it is designed to withstand shock and vibration, making it suitable for use in rugged environments.

  8. Q: What is the operating temperature range of the AT25DF011-SSHNGU-T? A: The AT25DF011-SSHNGU-T has an extended operating temperature range of -40°C to +85°C.

  9. Q: Does this flash memory chip have any security features? A: Yes, the AT25DF011-SSHNGU-T offers several security features, including hardware and software protection mechanisms to prevent unauthorized access to data.

  10. Q: Can I easily integrate the AT25DF011-SSHNGU-T into my existing design? A: Yes, this flash memory chip comes in a standard 8-pin SOIC package, making it easy to integrate into various circuit designs.

Please note that these answers are general and may vary depending on specific implementation details or requirements.