S-80919CLNB-G6PT2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80919CLNB-G6PT2G is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The S-80919CLNB-G6PT2G has the following pin configuration:
```
| | --|----|-- |____| ```
Pin 1: GND (Ground) Pin 2: RESET (Reset output) Pin 3: VDD (Supply voltage) Pin 4: NC (No connection) Pin 5: VOUT (Voltage detection output)
The S-80919CLNB-G6PT2G operates by continuously monitoring the input voltage. When the voltage falls below the detection threshold, the reset output is activated, signaling a low voltage condition. This feature is commonly used to initiate system resets or trigger specific actions in electronic devices.
The S-80919CLNB-G6PT2G finds application in various electronic devices where voltage monitoring and reset functionality are crucial. Some potential application fields include:
For those seeking alternative models with similar functionality, the following options are available:
These models offer comparable voltage detection ranges, package types, and functional features to the S-80919CLNB-G6PT2G.
In conclusion, the S-80919CLNB-G6PT2G is an integrated circuit designed for voltage detection and reset functions. Its wide voltage detection range, low power consumption, and compact package make it suitable for various electronic applications. However, its limited functionality and fixed voltage detection threshold should be considered when selecting alternative models.
Sure! Here are 10 common questions and answers related to the application of S-80919CLNB-G6PT2G in technical solutions:
1. What is the operating voltage range of S-80919CLNB-G6PT2G? - The operating voltage range of S-80919CLNB-G6PT2G is 1.6V to 6.0V.
2. What is the typical quiescent current of this device? - The typical quiescent current of S-80919CLNB-G6PT2G is 1.0µA.
3. Can I use this voltage detector for battery-powered applications? - Yes, S-80919CLNB-G6PT2G is suitable for battery-powered applications due to its low quiescent current.
4. What is the output type of this voltage detector? - S-80919CLNB-G6PT2G has an open-drain output.
5. What is the maximum output sink current of this device? - The maximum output sink current of S-80919CLNB-G6PT2G is 50mA.
6. Is this voltage detector suitable for automotive applications? - Yes, S-80919CLNB-G6PT2G is AEC-Q100 qualified, making it suitable for automotive applications.
7. Does this device have a built-in delay circuit? - Yes, S-80919CLNB-G6PT2G has a built-in delay circuit with a fixed delay time of 200ms.
8. Can I use this voltage detector for overvoltage protection? - No, S-80919CLNB-G6PT2G is not designed for overvoltage protection. It is primarily used for undervoltage detection.
9. What is the operating temperature range of this device? - The operating temperature range of S-80919CLNB-G6PT2G is -40°C to +85°C.
10. Does this voltage detector have any built-in hysteresis? - Yes, S-80919CLNB-G6PT2G has a built-in hysteresis of typically 0.1V, which helps prevent output oscillation near the detection threshold.
Please note that these answers are based on general information about S-80919CLNB-G6PT2G and may vary depending on the specific application requirements.