S-25C010A0I-T8T1G

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Memory
• Characteristics: Serial EEPROM, 1Mbit capacity
• Package: TSSOP-8
• Essence: Data storage and retrieval
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Capacity: 1 Megabit (128K x 8 bits)
• Interface: Serial I2C
• Operating Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Endurance: 1 Million cycles
• Data Retention: 100 Years
• Clock Frequency: Up to 1 MHz
• Package Dimensions: 3.00mm x 4.40mm x 0.90mm

Detailed Pin Configuration

1. VCC: Power supply voltage
2. SDA: Serial data input/output
3. SCL: Serial clock input
4. WP: Write protect input
5. GND: Ground
6. NC: No connection
7. NC: No connection
8. NC: No connection

Functional Features

• High-speed data transfer with I2C interface
• Low power consumption during read/write operations
• Built-in write protection mechanism
• Self-timed programming cycle
• Software and hardware write protection options
• Sequential and random read modes
• Page write mode for efficient programming

Advantages

• Compact package size allows for space-saving designs
• Wide operating voltage range enables compatibility with various systems
• High data retention ensures long-term reliability
• Low power consumption extends battery life in portable devices
• Easy integration into existing I2C bus systems

Disadvantages

• Limited storage capacity compared to other memory technologies
• Slower write speed compared to some other non-volatile memories
• Susceptible to data corruption in case of power failure during write operations

Working Principles

The S-25C010A0I-T8T1G is a serial EEPROM that utilizes the I2C interface for communication. It stores data in non-volatile memory cells, which retain information even when power is removed. The device can be accessed and programmed using standard I2C commands. During write operations, the data is transferred from the input buffer to the memory array and then verified for accuracy. The self-timed programming cycle ensures reliable and efficient programming.

Detailed Application Field Plans

• Consumer Electronics: Used for storing configuration settings, firmware updates, and user data in devices such as smartphones, tablets, and digital cameras.
• Automotive: Utilized in various automotive systems, including infotainment systems, instrument clusters, and engine control units, for data storage and retrieval.
• Industrial Automation: Integrated into industrial control systems for storing calibration data, parameter settings, and event logging.
• Medical Devices: Employed in medical equipment for storing patient data, device configurations, and software updates.
• IoT (Internet of Things): Used in IoT devices for storing sensor data, network settings, and firmware updates.

Detailed and Complete Alternative Models

• S-25C020A0I-T8T1G: 2Mbit capacity, same package and characteristics as S-25C010A0I-T8T1G.
• S-25C040A0I-T8T1G: 4Mbit capacity, same package and characteristics as S-25C010A0I-T8T1G.
• S-25C080A0I-T8T1G: 8Mbit capacity, same package and characteristics as S-25C010A0I-T8T1G.
• S-25C160A0I-T8T1G: 16Mbit capacity, same package and characteristics as S-25C010A0I-T8T1G.

(Note: The above alternative models are examples and not an exhaustive list.)

This entry provides comprehensive information about the S-25C010A0I-T8T1G serial EEPROM. It includes details about its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.